Keysight x-series User Reference Guide

10 Monitor Spectrum Measurement
The Monitor Spectrum measurement is an EMI measurement for the
X-Series platform that can be used for troubleshooting in pre-
compliance and compliance tests. The Monitor Spectrum
measurement is capable of measuring a signal and displaying both
an RF Spectrum and three EMI detectors simultaneously.
This topic contains the following sections:
"Measurement Commands for Monitor Spectrum" on page 726
"Remote Command Results for Monitor Spectrum Measurement" on
page 727
"Dependencies" on page 728
Keysight X-Series Signal Analyzer
EMI Receiver Mode Reference
725

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)