Gocator 2300 & 2880 Series
Gocator Web Interface • Scan Setup and Alignment • 109
To select the exposure view of the display:
1. Go to the Scan page and choose Video mode in the Scan Mode panel.
2. Select the camera view in the data viewer.
Select Main or Buddy from the first drop-down list next to View at the top of the data viewer.
3. Select the exposure.
Select the exposure from the second drop-down list next to View at the top of the data viewer. This
drop-down is only be visible if the Multiple option has been selected.
To display a color exposure overlay on the video image to help set the correct exposure, check Exposure
Indication at the top of the data viewer.
To Next Page
Loading...
Need help?
General
