LMI Technologies Gocator 2300 Series User Manual

Gocator 2300 & 2880 Series
Gocator Web Interface • Measurement • 160
Parameter Description
Output See Filters on page 141.
Intersect
The Intersect tool determines intersect points and angles. The measurement value can be compared
with minimum and maximum constraints to yield a decision.
The Intersect tool's measurements require two fit lines, one of which is a reference line set to the X axis (z
= 0), the Z axis (x = 0),or a user-defined line.
See Adding and Removing Tools on page 134 for instructions on how to add measurement tools.

LMI Technologies Gocator 2300 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2300 Series
Category	Accessories
Language	English