Gocator 2300 & 2880 Series
Protocols • Gocator Protocol • 307
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x1006).
status 32s 6
Reply status. For a list of status codes, see Commands on page
295.
Reply
Delete File
The Delete File command removes a file from the connected sensor (a .job file, a component of a job file,
or another type of file; for more information, see Job Files on page 236).
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x1008).
name[64] char 6 Source file name.
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x1008).
status 32s 6
Reply status. For a list of status codes, see Commands on page
295.
Reply
Get Default Job
The Get Default Job command gets the name of the job the sensor loads when it powers up.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x4100).
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4100).
status 32s 6
Reply status. For a list of status codes, see Commands on page
295.
name[64] char 10 The file name (null-terminated) of the job the sensor loads when
it powers up.
Reply
Set Default Job
The Set Default Job command sets the job the sensor loads when it powers up.
To Next Page
Loading...
Need help?
General
