Gocator 2300 & 2880 Series
Gocator Device Files • Job Files • 290
Element Type Description
0 – 12-bit
1 – 12-bit with search
2 – 14-bit
3 – 14-bit with search
Format.options 32s (CSV) List of available formats.
DataScaleMin 64f Measurement value corresponding to minimum word value.
DataScaleMax 64f Measurement value corresponding to maximum word value.
Ascii
Element Type Description
Delimiter String Field delimiter.
Terminator String Line terminator.
InvalidValue String String for invalid output.
CustomDataFormat String Custom data format.
CustomFormatEnabled Bool Enables custom data format.
Ascii Child Elements
Transform
The transformation component contains information about the physical system setup that is used to:
l
Transform data from sensor coordinate system to another coordinate system (e.g., world)
l
Define encoder resolution for encoder-based triggering
l
Define the travel offset (Y offset) between sensors for staggered operation
You can access the Transform component of the active job as an XMLfile, either using path notation, via
"_live.job/transform.xml", or directly via "_live.tfm".
You can access the Transform component in user-created job files in non-volatile storage, for example,
"productionRun01.job/transform.xml". You can only access transformations in user-created job files
using path notation.
See the following sections for the elements contained in this component.
Transformation Example:
<?xml version="1.0" encoding="UTF-8"?>
<Transform version="100">
<EncoderResolution>1</EncoderResolution>
<Speed>100</Speed>
<Devices>
<Device role="0">
<X>-2.3650924829</X>
To Next Page
Loading...
Need help?
General
