LMI Technologies Gocator 2300 Series User Manual

Gocator 2300 & 2880 Series
Protocols • Gocator Protocol • 311
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x101E).
status 32s 6
Reply status. For a list of status codes, see Commands on page
295.
Reply
Start
The Start command starts the sensor system (system enters the Running state). For more information
on states, see Control Commands on page 299.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x100D).
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x100D).
status 32s 6
Reply status. For a list of status codes, see Commands on page
295.
Reply
Scheduled Start
The scheduled start command starts the sensor system (system enters the Running state) at target time
or encoder value (depending on the trigger mode). For more information on states, see Control
Commands on page 299.
Field Type Offset Description
length 32u 0 Command size – in bytes.
id 16u 4 Command identifier (0x100F).
target 64s
6
Target scheduled start value (in ticks or µs, depending on the
trigger type).
Command
Field Type Offset Description
length 32u 0 Reply size – in bytes.
id 16u 4 Reply identifier (0x100F).
status 32s 6
Reply status. For a list of status codes, see Commands on page
295.
Reply

LMI Technologies Gocator 2300 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2300 Series
Category	Accessories
Language	English