LMI Technologies Gocator 2300 Series - Profileboundingbox

Gocator 2300 & 2880 Series
Gocator Device Files • Job Files • 256
Element Type Description
Measurements\Area Area tool
measurement
Area measurement.
Measurements\CentroidX Area tool
measurement
CentroidX measurement.
Measurements\CentroidZ Area tool
measurement
CentroidZ measurement.
Element Type Description
@id 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Enabled Boolean
Measurement enable state:
0 – Disable
1 – Enable
HoldEnabled Boolean
Output hold enable state:
0 – Disable
1 – Enable
SmoothingEnabled Boolean
Smoothing enable state:
0 – Disable
1 – Enable
SmoothingWindow 32u Smoothing window.
Scale 64f Output scaling factor.
Offset 64f Output offset factor.
DecisionMin 64f Minimum decision threshold.
DecisionMax 64f Maximum decision threshold.
Area Tool Measurement
ProfileBoundingBox
A ProfileBoundingBox element defines settings for a profile bounding box tool and one or more of its
measurements.
Element Type Description
Name String Tool name.
Source 32s Profile source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
ProfileBoundingBox Child Elements