Gocator 2300 & 2880 Series
Gocator Web Interface • User Interface Overview • 55
Data Viewer
The data viewer is displayed in both the Scan and the Measure pages, but displays different
information depending on which page is active.
When the Scan page is active, the data viewer displays sensor data and can be used to adjust regions of
interest. Depending on the selected operation mode (page 74), the data viewer can display video images,
3Dprofiles, or 3D surfaces. For details, see Data Viewer on page 107.
When the Measure page is active, the data viewer displays sensor data onto which representations of
measurement tools and their measurements are superimposed. For details, see Data Viewer on page
134.
Because Gocator 2880 has two cameras, two profiles are displayed in the Gocator web
interface.
To Next Page
Loading...
Need help?
General
