Gocator 2300 & 2880 Series
Gocator Emulator • Running the Emulator • 227
l
Choose a model family in the Model drop-down.
l
Choose Standalone or Buddy to limit the scenarios to single-sensor or dual-sensor scenarios, respect-
ively.
2. Select a scenario in the Available Scenarios list and click Start.
Removing a Scenario from the Emulator
You can easily remove a scenario from the emulator.
You can only remove user-added scenarios.
To remove a scenario:
1. If the emulator is running a scenario, click to stop it.
2. In the Available Scenarios list, scroll to the scenario you want to remove.
3. Click the button next to the scenario you want to remove.
The scenario is removed from the emulator.
Using Replay Protection
Because making changes to certain settings on the Scan page causes the emulator to flush replay data,
you can use the Replay Protection option to protect replay data.
When Replay Protection is on, you cannot switch from Replay mode. Settings that do not affect replay
data can be changed.
To Next Page
Loading...
Need help?
General
