Gocator 2300 & 2880 Series
Gocator Device Files • Job Files • 258
ProfileBridgeValue
A ProfileBridgeValue element defines settings for a profile bridge value tool and one or more of its
measurements.
Element Type Description
Name String Tool name.
Source 32s Profile source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
Anchor\Z String (CSV) The Z measurements (IDs) used for anchoring.
Anchor\Z.options String (CSV) The Z measurements (IDs) available for anchoring.
RegionEnabled Boolean Whether or not to use region. If region is disabled, all
available data is used.
Region
ProfileRegion2d
Measurement region.
WindowSize 64f A percentage of the profile point heights when ordered
from lowest to highest in a histogram, starting from the
highest points, to include in the bridge value calculation.
WindowSkip
64f A percentage of the profile point heights when ordered
from lowest to highest in a histogram, starting from the
highest points, to exclude from the bridge value calculation.
Combines with WindowSize to determine what portion of
the profile points are used in the bridge value calculation.
MaxInvalid
64f
The maximum percentage of invalid points.
NormalizeEnabled
Boolean Whether tilt normalization is enabled.
MaxDifferential
64f
Maximum differential between the lowest and highest
profile points (mm).
Measurements\BridgeValue Bridge Value tool
measurement
Bridge Value measurement.
Measurements\Angle Bridge Value tool
measurement
Angle measurement.
ProfileBridgeValue Child Elements
Element Type Description
@id 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Enabled Boolean
Measurement enable state:
0 – Disable
1 – Enable
HoldEnabled Boolean
Output hold enable state:
0 – Disable
BridgeValue Tool Measurement
To Next Page
Loading...
Need help?
General
