Gocator 2300 & 2880 Series
Protocols • Gocator Protocol • 300
A continue reply message contains a block of data of variable size, as well as status and progress
information. The series of continue messages is ended by either an error, or a continue message
containing 0 bytes of data.
Protocol Version
The Protocol Version command returns the protocol version of the connected sensor.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x4511)
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4511).
status 32s 6
Reply status. For a list of status codes, see Commands on page
295.
majorVersion 8u 10 Major version.
minorVersion 8u 11 Minor version.
Reply
Get Address
The Get Address command is used to get a sensor address.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x3012)
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x3012).
status 32s 6
Reply status. For a list of status codes, see Commands on page
295.
dhcpEnabled byte 10 0 – DHCP not used
1 – DHCP used
address[4] byte 11 IP address (most significant byte first).
subnetMask[4] byte 15 Subnet mask.
gateway[4] byte 19 Gateway address.
Reply
To Next Page
Loading...
Need help?
General
