Gocator 2300 & 2880 Series
Gocator Web Interface • System Management and Maintenance • 70
If a new version of the firmware is available, follow the instructions to download it to the client
computer.
If the client computer is not connected to the Internet, firmware can be downloaded and transferred to
the client computer by using another computer to download the firmware from LMI's website:
http://www.lmi3D.com/support/downloads.
To upgrade the firmware:
1. Go to the Manage page and click on the Maintenance category.
2. Click the Upgrade... button in the Firmware section.
3. Provide the location of the firmware file in the File dialog.
4. Wait for the upgrade to complete.
After the firmware upgrade is complete, the sensor will self-reset. If a buddy has been assigned, it will
be upgraded and reset automatically.
Support
The Support category in the Manage page is used to:
l
open an HTMLversion or download a PDFversion of the manual;
l
download the SDK;
l
save a support file;
l
get device information.
To Next Page
Loading...
Need help?
General
