Gocator 2300 & 2880 Series
Gocator Web Interface • Measurement • 151
Profile point heights in the white area are included in the calculation of the average. Profile point heights
in the grey area are excluded. By adjusting the Window and Skip parameters, you can choose profile
point heights to remove unwanted features. In road roughness applications, you could exclude road
features, such as rocks, cracks, tining valleys, and so on, to get an accurate representation of the tire-to-
road interface. For more information on parameters, see the Parameters table below.
The measurement value can be compared with minimum and maximum constraints to yield a decision.
See Adding and Removing Tools on page 134 for instructions on how to add measurement tools.
To Next Page
Loading...
Need help?
General
