LMI Technologies Gocator 2300 Series User Manual

Gocator 2300 & 2880 Series
• 35
2. Change the client PC's network
settings.
Windows 7
a. Open the Control Panel, select
Network and Sharing
Center, and then click Change
Adapter Settings.
b. Right-click the network
connection you want to
modify, and then click
Properties.
c. On the Networking tab, click
Internet Protocol Version 4
(TCP/IPv4), and then click
Properties.
d. Select the Use the following
IP address option.
e. Enter IP Address "192.168.1.5"
and Subnet Mask
"255.255.255.0", then click OK.
Mac OS X v10.6
a. Open the Network pane in
System Preferences and
select Ethernet.
b. Set Configure to Manually.
c. Enter IP Address "192.168.1.5"
and Subnet Mask
"255.255.255.0", then click
Apply.
See Troubleshooting on page 382 if you experience any problems while attempting to establish a
connection to the sensor.

LMI Technologies Gocator 2300 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2300 Series
Category	Accessories
Language	English