Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
4 - 18 3 302 633 en Operating Instructions GMK5250L
27.09.2017
• Check that the lamp (1) goes out.
If the lamp (1) is lit the symbol (2) is shown. The steering system has
failed. You must not under any circumstances drive the truck crane.
Contact
Manitowoc Crane Care and arrange for the error to be rectified.
S
Risk of accidents because the truck crane cannot be steered!
Under no circumstances may you drive the truck crane when the red lamp
(1) is lit. The truck crane can no longer be steered safely.
When driving, the 4th and 5th axles may move uncontrollably, which can
cause a serious accident even at low speeds.
To Next Page
Loading...
Need help?
General
