Rigging work
11.11 Other rigging work
11 - 138 3 302 633 en Operating Instructions GMK5250L
27.09.2017
Installing
• Insert the camera (2) into the clamp (1) and
secure it with the retaining pin.
• Insert the plug (4) into the socket (3).
• Lay the cable (5) so that it will not be
damaged.
Removing
• Pull the plug (4) out of the socket (3) and
close the socket with the cap.
• Remove the camera (2) from the clamp (1)
and insert the retaining pin in the holder (1).
• Wind the cable (5) on to the clamp.
To Next Page
Loading...
