Malfunctions during crane operation
14.3 Warning and error messages
Operating Instructions GMK5250L 3 302 633 en 14 - 11
27.09.2017
– RCL override (switch 3) not actuated
– RCL override (switch 3) actuated
– RCL override, all switches actuated
– Learn-in phase
Displayed only during maintenance by service personnel
– Data acquisition
Displayed only during maintenance by service personnel
– Lattice extension, maximum permissible load exceeded
– Load too low
– RCL error status display
– Active working range limiter, maximum permissible overall height
reached
s
To Next Page
Loading...
