Mitsubishi FX3U-232-BD - 1.3.2 Products whose production was stopped; 1.4 Programming Tool Applicability; 1.4.1 For applicable versions

D-6
FX Series PLC User's Manual - Data Communication Edition
Computer Link
1 Outline
1.4 Programming Tool Applicability
1.3.2 Products whose production was stopped
The table below shows FX series whose production (main unit, communication equipment, etc.) was stopped.
Use the description on system configuration, etc. in this manual for maintenance.
1.4 Programming Tool Applicability
1.4.1 For applicable versions
The programming tool is applicable for each FX Series from the following version shown:
1. Japanese versions
: Applicable (If applicable versions are limited, they are described inside ( ).)
—: Not applicable
PLC Date when production was stopped Remarks
FX
0 Series
June 30, 2002
Maintenance is offered within 7 years from the
end of production (until June 30, 2009).
FX
2C Series
FX
2(FX) Series
FX
1 Series
Model name
(Software name)
Applicability
(applicable version)
Remarks
FX3U and FX3UC PLCs
GX Developer
SWD5C(F)-GPPW-J
 (Ver. SW8 P or later)
Ver. 8.13P
Select the model "FX3U/FX3UC".
FX2N and FX2NC PLCs
GX Developer
SWD5C(F)-GPPW-J
 (Ver. SW2 A or later)
Select the model "FX2N/FX2NC".
FX-PCS/WIN
SW0PC-FXGP/WIN
 (Ver. 2.00 or later)
FX-PCS-KIT/98
SW1PC-FXGP/98(-3,-5)
 (Ver. 4.00 or later)
FX-PCS/98-3
SW1PC-FXGP/98-3
 (Ver. 4.00 or later)
FX-PCS-KIT/V-3
SW1-PC-FXGP/V3
 (Ver. 2.00 or later)
FX-A7PHP-KIT
SW1RX-GPPFX
 (Ver. 3.00 or later)
FX-20P(-SET0)
FX-20P-MFXC
 (Ver. 4.00 or later)
FX-10P(-SET0)  (Ver. 3.00 or later)
GOT-F900 Series display
units
F940WGOT-TWD
F940GOT-*WD
F940GOT-*BD-H
F940GOT-*BD-RH

(Refer to right column.)
F940WGOT-TWD (Ver. 1.00 or later)
F940GOT-LWD, F940GOT-SWD (Ver. 1.00 or later)
F940GOT-LBD-H, F940GOT-SBD-H (Ver. 1.00 or later)
F940GOT-LBD-RH, F940GOT-SBD-RH (Ver. 1.00 or later)