Mitsubishi FX3U-232-BD - 1.4.2 For non-applicable versions (setting an alternative model)

G-7
FX Series PLC User's Manual - Data Communication Edition
Non-Protocol Communication (FX2N-232IF)
1 Outline
1.4 Programming Tool Applicability
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.
Discontinued models
2. English versions
: Applicable (If applicable versions are limited, they are described inside ( ).)
—: Not applicable
1.4.2 For non-applicable versions (setting an alternative model)
Even software not applicable to a PLC can create programs when an alternative model is set.
In this case, however, programming is enabled only in the ranges provided for the alternative PLC model
such as instructions and program size.
Model name
(Software name)
Applicability
(applicable version)
Remarks
FX3U and FX3UC PLCs
GX Developer
SWD5C(F)-GPPW-E
 (Ver. SW8 P or later)
Ver. 8.13P
Select the model "FX3U/FX3UC"
FX2N and FX2NC PLCs
GX Developer
SWD5C(F)-GPPW-E
 (Ver. SW2 A or later)
Select the model "FX2N/FX2NC"
FX-PCS/WIN-E
SW0PC-FXGP/WIN-E
 (Ver. 1.00 or later)
FX-20P-E(-SET0)
FX-20P-MFXC-E
 (Ver. 3.00 or later)
FX-10P-E  (Ver. 3.00 or later)
GOT-F900 Series display
units
F940WGOT-TWD-E
F940GOT-*WD-E
F940GOT-*BD-H-E
F940GOT-*BD-RH-E

(Refer to right column)
F940WGOT-TWD-E (Ver. 1.00 or later)
F940GOT-LWD-E, F940GOT-SWD-E (Ver. 1.00 or later)
F940GOT-LBD-H-E, F940GOT-SBD-H-E (Ver. 1.00 or later)
F940GOT-LBD-RH-E, F940GOT-SBD-RH-E (Ver. 1.00 or later)
Model to be
programmed
Model to be set Priority: High → Low
FX
3UC Series FX3UC → FX2N → FX2(FX)
FX
3U Series FX3U, FX3UC → FX2N → FX2(FX)
FX
2NC Series FX2NC, FX2N → FX2(FX)
FX
2N Series FX2N → FX2(FX)