Mitsubishi FX3U-232-BD User Manual

F-14
FX Series PLC User's Manual - Data Communication Edition
Non-Protocol Communication (RS/RS2 Instruction)
3 System Configuration and Selection
3.2 Applicable FX PLC and Communication Equipment
3.2 Applicable FX PLC and Communication Equipment
Select a communication equipment combination, and put a check mark in the "Check" column.
During selection, pay attention to the following:
- Non-protocol communication is not provided for the FX
0, FX0S, FX1 Series.
- In the table below, only the external dimensions are different between the units shown in "FX
2NC-
485ADP/FX
0N-485ADP". Select either one.
3.2.1 For communication in accordance with RS-232C
FX Series Communication equipment (option)
Total extension
distance
Check
FX
0N
15 m
(49' 2")
FX
1S
15 m
(49' 2")
15 m
(49' 2")
FX
1N
15 m
(49' 2")
15 m
(49' 2")
FX
2N
15 m
(49' 2")
15 m
(49' 2")
FX 2NC -232ADP
(9-pin D-Sub, male)
FX 0N -232ADP
(25-pin D-Sub, female)
FX 1N -232-BD
(9-pin D-Sub, male)
FX 1N -CNV-BD
+
FX 2NC -232ADP
(9-pin D-Sub, male)
FX 0N -232ADP
(25-pin D-Sub, female)
FX 1N -CNV-BD
+
FX 1N -232-BD
(9-pin D-Sub, male)
FX 1N -CNV-BD
+
FX 2NC -232ADP
(9-pin D-Sub, male)
FX 0N -232ADP
(25-pin D-Sub, female)
FX 1N -CNV-BD
+
FX 2N -232-BD
(9-pin D-Sub, male)
+
FX 2NC -232ADP
(9-pin D-Sub, male)
FX 0N -232ADP
(25-pin D-Sub, female)
+
FX 2N -CNV-BD
FX
2N -CNV-BD

Mitsubishi FX3U-232-BD Specifications

General

Brand	Mitsubishi
Model	FX3U-232-BD
Category	Controller
Language	English