I-21
FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
5 How to Setup Modems on the PLC Side
5.1 Setting Using GX Developer
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter
Communication
F
Non-Protocol
Communication
(RS/RS2 Instruction)
G
Non-Protocol
Communication
(FX
2N
-232IF)
H
Programming
Communication
I
Remote
Maintenance
Apx.
Discontinued
models
5.1.2 Modem initialization setting using parameter method
This subsection explains how to select the AT command for initialization registered in the PLC and how to set
the AT command for an unregistered modem.
1 Opening the PLC parameter setting window
Double-click [Parameter] - [PLC parameter] from the project tree.
If the project tree is not displayed, select [View] - [Project data list] from the toolbar.
2 Selecting the modem initialization method
Click the [PLC system(1)] tab on the dialog box.
Select a modem to be connected in "MODEM initialized," and click the [End] button.
To Next Page
Loading...
Need help?
General
