D-24
FX Series PLC User's Manual - Data Communication Edition
Computer Link
4 Wiring
4.1 Wiring Procedure
4.1 Wiring Procedure
1 Selecting the connection method
Select the wiring method suitable to the application.
→ For details, refer to Section 4.2.
2 Preparing for wiring
Prepare cables and terminal resistors required for wiring.
→ For details, refer to Section 4.3.
3 Turning OFF the PLC power
Before starting any wiring work, make sure that the PLC power is OFF.
4 Connecting the power supply (FX0N-485ADP only)
Connect the power supply to the 24V DC power terminal.
5 Wiring communication equipment
Connect communication equipment operating in accordance with RS-485 or RS-232C.
→ For communication in accordance with RS-232C, refer to Section 4.4.
→ For communication in accordance with RS-485, refer to Section 4.5.