Mitsubishi FX3U-232-BD - 1.3 Communication Type Applicability in PLC; 1.3.1 Applicable versions; 1.3.2 Products whose production was stopped

H-5
FX Series PLC User's Manual - Data Communication Edition
Programming Communication
1 Outline
1.3 Communication Type Applicability in PLC
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.
Discontinued models
1.3 Communication Type Applicability in PLC
1.3.1 Applicable versions
The communication types are applicable in the following versions.
: Applicable (If applicable versions are limited, they are described inside ( ).)
—: Not applicable
*1. When using USB communication with a model that does not support USB communication equipment
(-BD), use the FX-USB-AW.
However, FX
2(FX), FX2C and FX1 PLCs do not support the FX-USB-AW.
1.3.2 Products whose production was stopped
The table below shows FX series whose production (main unit, communication equipment, etc.) was stopped.
Use the description on system configuration, etc. in this manual for maintenance.
PLC
Standard
built-in port
in
accordance
with RS-422
Optional
communication
equipment
operating in
accordance
with RS-422
(-BD)
Optional
communication
equipment
operating in
accordance
with RS-232C
Optional
communication
equipment
operating in
accordance
with USB
(-BD)
*1
Remarks
(-BD) (ADP)
FX3UC(D, DSS)
Series
 —— —
Programming communication
is provided in all of the stan-
dard built-in port and optional
communication equipment
operating in accordance with
RS-422/RS-232C/USB.
FX3UC-32MT-
LT

FX
3U Series 
FX
2NC Series  —— —
FX
2N Series —
FX
1NC Series  —— —
FX
1N Series —
FX
1S Series —
FX
0N Series  —— —
Programming communication
is provided in all of the stan-
dard built-in port, but is not
provided in any optional com-
munication equipment operat-
ing in accordance with RS-
422/RS-232C/USB.
FX0S Series  ————
FX
0 Series  ————
FX
2C Series  —— —
FX
2(FX) Series  —— —
FX
1 Series  ————
PLC Date when production was stopped Remarks
FX
0 Series
June 30, 2002
Maintenance is offered within 7 years from the
end of production (until June 30, 2009).
FX
2C Series
FX
2(FX) Series
FX
1 Series