H-32
FX Series PLC User's Manual - Data Communication Edition
Programming Communication
6 Connection Setting for Personal Computer
6.1 Connection Setting (GX Developer)
6. Connection Setting for Personal Computer
This chapter explains the setting method for connecting a personal computer and a PLC.
Two software packages, GX Developer and FXGP/WIN for Windows, are applicable. The setting method is
different between the two software packages.
6.1 Connection Setting (GX Developer)
GX Developer, Windows software for personal computers, has the following items to be set. Set each item
according to the connection status.
• RS-232C or USB
• Communication port
• Transmission speed
• CPU unit (provided only in FX
3U and FX3UC PLCs)
This setting is required to use the transparent function in the GOT-F900 display unit (described later).
• Communication time check
• Number of retries
Each set item can be checked and changed on the connection destination specification window.
Display the connection destination specification window using the following procedure.
1 Selecting [Online] - [Transfer Setup] from the toolbar.
The window below appears.
Caution
While the monitor function window is displayed, [Transfer Setup] cannot be selected.
To Next Page
Loading...
Need help?
General
