Mitsubishi FX3U-232-BD - 2. Specification; 2.1 Communication Specifications

G-8
FX Series PLC User's Manual - Data Communication Edition
Non-Protocol Communication (FX2N-232IF)
2 Specification
2.1 Communication Specifications
2. Specification
This chapter explains the communication specifications.
2.1 Communication Specifications
Non-protocol communication type is used in the communication specifications shown in the table below.
Item Specifications Remarks
Transmission standard RS-232C standard
Maximum total extension distance 15 m (49' 2")
Protocol type Non-protocol communication
Communication method Full-duplex, asynchronous system
Baud rate 300/600/1200/2400/4800/9600/19200 bps
Character format —
Start bit —
Data bit 7-bit/8-bit
Parity bit None, odd or even
Stop bit 1-bit/2-bit
Header Provided or not provided
Up to four bytes can be
specified.
Terminator Provided or not provided
Control line Provided or not provided
Sum check Provided or not provided