Nitsuko 1232 - Page 210

¾ 5-13 ¾
Program 15
This program selects the functions for the system.
Display Indication Input Data Initial
SYS# ASSIGNMENT1
#####15###-ABCDE
A. Lamp Shift Mode (TX-Z 824/1232/2464)
0: Disable 1: Enable
B. Night Service
0: All Tenant 1: Each Tenant
C. Automatic Trunk Access
0: Disable
1: Press SPK key and queuing group No.
2: (On-Hook condition) Dial 0
3: 1 + 2
D. Exclusive Hold
0: Disable 1: Enable
E. Single Step Access
0: Disable 1: Enable
A: 0
B: 0
C: 2
D: 0
E: 1
Program 16
This program selects the functions for the system.
Display Indication Input Data Initial
SYS# ASSIGNMENT#
#####16###-ABCDE
A. Ringing Trunk Off-Hook Access
0: Disable
1: All call to Incoming GP1 and ringing call to
incoming GP2
2: Ringing call to incoming GP1 and GP2
B. Recall Trunk Off-Hook Access
0: Disable 1: Enable
C. Specified Trunk Access for SLT
0: Seize a Trunk line for outgoing call
1: Seize a Trunk line for outgoing call and
pickup held line
D. Add-On Conference Setup Mode
0: Add one by one
1: Add 5 parties at once
E. Multi-line Conference
0: Disable 1: Enable
A: 2
B: 1
C: 0
D: 0
E: 0