Nitsuko 1232 - Page 209

¾ 5-12 ¾
Program 14
This program assigns an extension number to a telephone port.
Display Indication Input Data Initial
(Start condition)
FLEX.STA.#ING###
#####14-00######
*
Enter the digit setting mode
1. Press "
*
" key.
(Digit setting mode)
FLEX.STA.#ING###
#####14-00##-002
*
Digit set operation
1. Dial "00" and "2" or "3".
(2 or 3 digits mode select)
2. Press "
*
" key.
(Return to the start condition)
Di
g
it: 002
(2 digits mode)
FLEX.STA.#ING###
#####14-ST###-SS
ST. Extension number (10 - System Max)
SS. 10 - 79 (2 digits mode)
SS: 00 (Not assigned)
SS = ST
(3 digits mode)
FLEX.STA.#ING###
#####14-ST##-SSS
SSS. 100 - 799 (3 digits mode)
SSS: 000 (Not assigned)
(3 digit mode is not available on TX-Z 308
system.)
Originally assigned extension numbers in 3 digits mode are 110 to 173. If the customer wants other
extension number within a specific range, extension numbers must be changed by this program.