Nitsuko 1232 - Page 218

¾ 5-21 ¾
Program 35
This program assigns each of the three modes (Day, Night, Dial Block) Toll Restriction Class level
(0 - 5) to each extension.
Display Indication Input Data Initial
CLASS# OF# SERVICE
#####35-ST##-ABC
ST. Extension number (10 - System Max)
A. Toll Restriction Class (Day)
0 - 5: Class A - F
B. Toll Restriction Class (Night)
0 - 5: Class A - F
C. Toll Restriction Class (Dial Block)
0 - 5: Class A - F
(ALL)
A: 0
B: 0
C: 5
Program 36
This program selects up to 20 Permitted Codes, numbered 01 - 20. A Permitted Code can contain
up to the first 12 digits of the desired telephone number.
Display Indication Input Data Initial
PERMITTED# CODES
#####36-NN######
PERMITTED# CODES
####DDDDDDDDDDDD
NN. Permitted code number (01 - 20)
DDDDDDDDDDDD: Permitted code assignment
(From 1 to 12 digits allowed)
* To clear data, press OPAC key.
(NN =
01 - 20)
DDDDDDDD:
No settin
g
Program 37
This program enables or disables the Permitted Code Digit Limit feature. If enabled, the maximum
number of digits per Permitted Code call ranges from 1 to 30.
Display Indication Input Data Initial
CODE# DIGIT# LIMIT
########37###-DD
DD. Digit
00: No restriction
01 - 30: 1 digit - 30 digits
* A maximum of 30 digits can be programmed.
DD: 00