Nitsuko 1232 - Page 220

¾ 5-23 ¾
Program 41
This program selects up to 30 Restricted Codes for Class C and D, numbered 1 - 30. A Restricted
Code can be up to five digits long.
Display Indication Input Data Initial
RESTR.CODES# D2##
#####41-NN-DDDDD
N. Restrict code number (1 - 30)
DD. Restrict code
(From 1 to 5 digits set allowed)
* To clear data, press OPAC key.
* A maximum of 30 types can be programmed.
(N = 1 -30)
DDDDD :
No settin
g
Program 42
This program creates Walking Toll Restriction Security Codes. Up to 30 security codes can be
created. The security codes are identified by the numbers 01 - 30, and each code is four digits long.
Display Indication Input Data Initial
UNREST.SEC.CODES
#####42-NN# -DDDD
N. Security Code number (01 - 30)
DDDD. Security Code
(From 1 to 4 digits set allowed)
* To clear data, press OPAC key.
* A maximum of 30 types can be programmed.
(N =01-30)
DDDD :
No settin
g
Program 43
This program assigns restriction class (A to F) to each Walking Toll Restriction Security Code.
Display Indication Input Data Initial
UNREST.CLASS####
#####43-NN####-D
N. Number (01 - 30)
D. Restriction class
0 - 5: Class A - F
* "N" is corresponding security code in the
Program 42.
* Class shall be defined in Program 35.
(N =01-30)
D: 0