¾ 5-27 ¾
Program 52
This program assigns features for tenant group.
Display Indication Input Data Initial
TENANT# OPTION###
#####52-N#####-D
N. Feature number (1 - 5)
1: Intercom call
2: Internal paging call
3: Common abbreviated dial
4: Transfer to attendant
5: DSS LED Indication (Only TX-Z
1232/2464)
D. Feature access
(N = 1, 2)
0: Allowed 1: Restrict
(N = 3)
0: Common use
1: Assigned abbreviated dial
(N = 4)
0: System 1: Each tenant group
(N = 5) (Only TX-Z 1232/2464)
0: Indicating all extensions in system
1: Indicatin
roup to
which the DSS belongs
(N = 1 - 5)
D: 0
Program 53
This program divides abbreviated dial numbers between each tenant group.
Display Indication Input Data Initial
(Abbreviated Dial : 100)
TENANT# ABBR.DIAL
#####53-NN-ST-ED
NN. Tenant group number (01 - 04)
ST. Start abbreviated dial number (00 - 99)
ED. End abbreviated dial number (00 - 99)
(NN=
01 - 04)
ST: 00
ED: 99
(Abbreviated Dial : 200)
TENANT# ABBR.DIAL
#####53-NN######
TENANT# ABBR.DIAL
#####53# -STA-END
NN. Tenant group number (01 - 04)
STA. Start abbreviated dial number
(000 - 199)
END. End abbreviated dial number
(000 - 199)
* When Program 17-D is re-written the Data, this
Program is reset.
STA: 000
END: 199
To Next Page