Nitsuko 1232 - Page 225

¾ 5-28 ¾
Program 54
This program assigns attendant extension for each tenant group.
Display Indication Input Data Initial
TENANT# ATT.ASSIG
#####54####XX-ST
XX. Tenant group No. (01 - 04)
(Cannot input dial)
ST. Each tenant group attendant
00: Not assigned
10 - System Max: (Extension Number)
(XX =
01 - 04)
ST: 00
Program 55
This program assigns line keys used as Park Hold keys for each Park Hold group.
Park Hold Feature is available only on TX-Z 824/1232/2464 system.
Display Indication Input Data Initial
PARK# HD# LN.ASSIG
#####55-NN-ST-ED
NN. Park hold group number (01 - 04)
ST. Start line key No.
00: Not assigned
01 - 12: Line key 01 - 12
ED. End line key No.
00: Not assigned
01 - 12: Line key 01 - 12
(NN =
01 - 04)
ST: 00
ED: 00
Program 56
This program selects a mode of option relay.
Display Indication Input Data Initial
RELAY# ASSIGN####
#####56-N#####-D
N. Relay number (1 - 2)
D. Control type
0: Not assigned 1: Doorphone 1
2: Doorphone 2 3: External M.O.H
4: BGM (Only TX-Z 824/1232/2464)
(N = 1 - 2)
D: 0
TX-Z 824/1232/2464