Nitsuko 1232 - Page 227

¾ 5-30 ¾
Program 59
This program assigns Dial Digits which is printed on SMDR reports.
Display Indication Input Data Initial
SMDR# PRINT# DIGIT
#####59######-DD
DD. Dial Digits
01 - 24: 1 - 24 digits
DD: 08
Program 60
This program assigns Polarity Reverse Detect Time.
Display Indication Input Data Initial
LN.REVERSE# TIMER
#####60#####-TTT
TTT. Polarity Reverse Detect Time
001 - 255: 100 ms - 25.5 seconds
TTT: 008
Program 61
This program assigns Alpha-numeric keypads, Caller-ID data indication, Caller-ID table editing,
SMDR prints outgoing information and Doorphone call/ answer.
Display Indication Input Data Initial
STN# ASSIGNMENT4
#####61-ST-ABCDE
ST. Extension Number (10-System max.)
A. Alpha-numeric key pad assignment
0: Pattern1(1st Model Tel)
1: Pattern2(ITU-T Rec.E.161)
(2nd Model Tel)
B. Caller-ID data Indication
0: Disable 1: Enable
C. Caller-ID table editing
0: Disable 1: Enable
D. SMDR outgoing information print
0: Print 1: No print
E. Doorphone call/answer
0: Disable 1: Enable
A: 0
B: 1
C: 1
D: 0
E: 0
TX-Z 1232/2464 Only