Nitsuko 1232 - Page 228

¾ 5-31 ¾
Program 62
This program assigns ports which connect to DSS Console, and the extension which pairs with DSS
Console.
Each DSS Console must be connected to the last port of each unit.
Display Indication Input Data Initial
DSS# CONSOLE# PORT
#####62-N# -PO-ST
N. DSS Console No. (1 - 2)
(Cannot input dial)
PO. DSS Console port No.
(17, 25, 33, 41, 49, 57, 65, 73)
ST. Pair Extension No. (10 - System Max)
(N = 1-2)
PO :
No settin
g
ST :
No settin
g
Program 63
This program assigns data for DSS Console features.
Display Indication Input Data Initial
DSS# ASSIGNMENT1
#####63###-ABCDE
A. Automatic Hold of Line
0: Disable 1: Enable
B. DND Override
0: Disable 1: Enable
C. -- Not Used --
(This item must to be programmed as "0".)
D. -- Not Used --
(This item must be programmed as "0".)
E. -- Not Used --
(This item must be programmed as "0".)
A: 0
B: 0
C: 0
D: 0
E: 0
TX-Z 1232/2464 Only
TX-Z 1232/2464 Only