Nitsuko 1232 - Page 229

¾ 5-32 ¾
Program 64
This program selects the functions for the system.
Display Indication Input Data Initial
SYS# ASSIGNMENT7
#####64###-ABCDE
A. Maximum time of Personal Message
(TX-Z 1232/2464)
0: 4 sec. 1: 8 sec.
2: 12 sec. 3: 16 sec.
B. Temporary Memory status for Caller-ID
0: Not Indicate 1: Indicate
C. Automatic Trunk seizing type selection
0: Seizing from small number
1: Seizing from large number
2: Seizing by turns (1
®
2
®
3……)
D. LED Indication for DISA incoming call
0: Busy (Not to answer)
1: Normal incoming (O.K. to answer)
E. SLT Hold operation
0: Enable 1: Disable
A: 3
B: 0
C: 0
D: 0
E: 0
Program 65
This program assigns the extension ports connected to NVM (Nitsuko Voice Mail) on TX-Z 824
System.
This program assigns timers for Unattendant Message feature on TX-Z 1232/2464 System.
- Item-1 in this program assigns duration time from system detects the incoming call to system
automatically answers and sends a Waiting Message to outside caller.
- Item-2 in this program assigns duration time from system automatically answers to system sends
cut-off message.
Display Indication Input Data Initial
VOICE MAIL PORT
#####65#####NN-ST
TX-Z 824 Only
NN. 01 - 08
ST. 00: Not Connected
10 - System Max:
Extension Port No.
(NN = 01 - 08)
ST: 00
INCOMING# TIMERS#
#####65-N###-TTT
TX-Z 1232/2464 Only
N. 1: Automatic answer time
2: Cut off time
TTT. Time
000: Disable
001 - 255: 1 - 255 sec.
(N = 1)
TTT: 000
(N = 2)
TTT: 000