Nitsuko 1232 - Page 233

¾ 5-36 ¾
Program 76
This program assigns security code for listening to recorded message from outside.
Display Indication Input Data Initial
DISA# PASSWORD##
#####76-ST# -DDDD
ST. Extension number
DDDD. Security code (4 digits fix)
* To clear data, press OPAC key.
DDDD:
Not assi
g
n
(All
extensions)
Program 77
This program determines whether an extension can immediately place a call on hold or the timer in
Program 87 will be followed.
Display Indication Input Data Initial
STN# ASSIGNMENT6
#####77-ST##-ABC
ST. Extension number (10 - System Max.)
A. Day mode
B. Night mode
C. Dial Block mode
0: Can not hold within the timer (#87)
1: Can always hold
(No.10 Tel)
ABC = 100
(Others)
ABC = 000
Program 78
This program assigns Automatic Caller-ID Data Display, SLT Dial Tone Pattern, Break-In Warning
tone for SLT, Dial 0/9 Operation and DISA Dial Tone Assignment.
Display Indication Input Data Initial
SYS# ASSIGNMENT8
#####78 -ABCDE
A. Automatic Caller-ID Data Displayin
g
0: Disable 1:Enable
B. SLT Dial Tone
0: Continuous 1:0.3s On/0.2s Off
C. Break In Warning Tone
0: Disable 1:Enable
D. Dial 0 / 9 Operation (TX-Z 1232/2464 Only)
0: Normal 1:Call Operator
E. DISA Dial Tone Assignment
0: Send 1:No Tone
A: 1
B: 0
C: 0
D: 0
E: 0
TX-Z 1232/2464 Only