¾ 7-1-19 ¾
Caller-ID Table
3. To use Bin Number
(1) To store the new information/To change the current information
Display Indication Operation and Information
##SUN# 25# 12:00PM
10##############
(On-Hook condition)
BIN# NO.#########
1. Press OPAC key.
2. Dial 91.
BIN# NO.001######
3. Dial 001. (up to 100)
BIN# NO.001######
4. Press
*
key.
* If wrong Bin number is entered, the display shall return to
input mode for Bin number.
* If a Telephone Number is stored in Table, it shall be
displayed in lower column.
* If a Telephone Number is not stored in Table, the lower
column shall be displayed as "INPUT TEL NO.".
##SUN# 25# 12:00PM
* If KTS is not allowed to edit (#61-C) or other KTS is
storing information in same time, Error Tone shall be
heard and return to the idle condition.
BIN# NO.001######
######0448111111
5. Dial Telephone Number.
(for example: 044-811-1111)
* If the dial input has error, OPAC key is to clear the lower
column. Then input assign.
* If the telephone number is not necessary to change, this
operation shall be skipped.
BIN# NO.001######
6. Press
*
key.
* If a caller's name is stored in Table, it shall be displayed in
lower column.
* If a caller's name is not stored in tale, the lower column
shall be blanked.
To Next Page
Loading...