¾ 7-1-25 ¾
Caller-ID Table
(3) To delete the current information by Searching the Telephone Number
Display Indication Operation and Information
##SUN# 25# 12:00PM
10##############
(Caller-ID information has already stored to the table.)
SEARCH# NUMBER##
1. Press OPAC key. (On-Hook condition)
2. Dial 93.
SEARCH# NUMBER##
##############04
3. Press Caller's Telephone Number (one digit to 10 digits
from ahead) for search.
* If the dial input has error, OPAC key is to clear the lower
column. Then input again.
0448111111##
NITSUKO CORP.
4. Press
*
key.
* The corresponding data shall be displayed.
0448137101##
NITSUKO OVERSEA
5. Press # key (search the forward information) or
*
key
(search the Backward information).
SEARCH# NUMBER##
LIST# END########
* If information is not in table, the indication shall be as
shown;
BIN# NO.012######
######0448111111
6. Press HOLD key.
* Corresponding Bin No. shall be displayed according to
the stored Telephone Number.
##SUN# 25# 12:00PM
10##############
* If KTS is not allowed to edit (#61-C) or other KTS is
storing some information, error tone shall be heard and
return to idle condition.
BIN# NO.012######
7. Press OPAC key.
(delete Current information)
* Lower column shall be blanked.
##SUN# 25# 12:00PM
10##############
8. Press
*
key. (delete completed)
* Return to the idle condition.
To Next Page
Loading...