Nitsuko 1232 - Page 346

¾ 7-3-1-6 ¾
Table of VAU Message
Message
No.
Message Type Description
07 Demanding Message for
Leave a Message or
Telephone No.
This message is sent before outside caller dials to leave
a message or telephone number. This message is sent
when extension user did not record Personal Message.
This message is used by only KTS with Display.
Example Message:
This extension is not available now. Please dial "1" to
leave a message, or dial "2" to leave your telephone No.
08 Error Message 1 This message is sent when outside caller failed to
dialing the Security Code, Extension Number or Hunt
Group Number.
Example Message:
That is invalid entry. Dial "#" then "*
**
*" to return to
previous condition.
09 Error Message 2 This message is sent when outside caller failed to
dialing the Leave Message Code or Leave Telephone
Number Code.
Example Message:
That is invalid entry. Please try again.
10 Memory Full Message This message is sent when memory capacity is full for
Leave Message or Telephone Number, or on the Hunt
Group Access, all extensions are busy.
Example Message:
The feature is not available at the moment due to no
memory capacity. Dial "#" then "*
**
*" to return to
previous condition or wait until the operator answers.
11 Starting Message for
Leave Message
This message is sent before outside caller leaves a
message.
Example Message:
Please leave your message after beep tone. Recording
time is XX sec.
12 Starting Message for
Leave Telephone No.
This message is sent before outside caller leaves a
telephone number.
Example Message:
Please enter your telephone number then dial "#".