¾ 7-3-1-7 ¾
Table of VAU Message
Message
No.
Message Type Description
13 Ending Message for Leave
Message
This message is sent when outside caller finishes for
leaving a message.
Example Message:
Message has been recorded.
14 Ending Message for Leave
Telephone No.
This message is sent when outside caller finishes
leaving telephone number.
Example Message:
Telephone number has been recorded.
15 Confirmation Message for
Leave Telephone No.
This message is sent when telephone number is left at
each KTS with display.
Example Message:
You have left telephone number. Please confirm.
16 Demanding Message for
Seize the 2'nd Line
This message is sent to be seized the 2nd line by
outside caller on the Trunk-to-Trunk.
For Example Message:
Dial queuing group number or dial "9" then line
number to seize 2nd line.
17 Continue Message This is operation message to inform outside caller of
how to continue or finish the conversation on the Trunk-
to-Trunk.
Example Message:
For your information, you hear the long beep tone in
the conversation. You can continue your conversation
by dialing 1 after beep tone. Otherwise, the line will be
cut off.
18 Demanding Message for
Telephone Number (DISA)
On the Trunk-to-Trunk feature, this message is sent for
asking to dial the telephone number after seizing 2nd
line.
Example Message:
Please dial telephone number and dial "#".
19
Trunk line
Busy Condition
Message
On the Trunk-to-Trunk, this message is sent when
outside caller cannot seize 2'nd line.
Example Message:
All lines are busy. Dial "#" then "*
**
*" to return to
previous condition.
To Next Page
Loading...