¾ 7-3-3-22 ¾
Features on Transfer
To record a Paging Message (Personal Message): (Cont'd)
Display Indication Operation and Information
##SUN# 25# 12:00PM
10##############
6. Hang up or press SPK.
* When user hangs up or presses SPK without dial
*
or #,
the recorded message will be saved. When maximum
time of recording (4/8/12/16 sec.) has passed during
record message, timer counting will automatically be
finished and the recorded message will be saved.
(SLT)
1. Lift handset.
2. Dial 7 and 952. (Dial Plan 1) (see Note 2)
or
2. Dial 0572 (9572). (Dial Plan 2) (see Note 2)
3. Dial
*
. (Recording start.)
4. Record a message from handset.
5. Dial
*
. (Recording is finished and Dial Tone may be sent.)
(see Note 3)
6. Hang up.
* When user hangs up without dial
*
or #, the recorded
message will be saved. When maximum time of recording
(4/8/12/16 sec.) has passed during record message, timer
counting will automatically be finished and the recorded
message will be saved.
Note 1: When Program #75-D is 0 (No tone), press ICM key
to seize Intercom after lifting handset.
Note 2: When VAU unit is not inserted in the system, Voice
Paths are occupied or Memory area for the Personal
Message is full condition, Busy Tone will be sent.
Note 3: If user dials "#" instead of "
*
", recording contents will
be canceled and Dial Tone may be sent.
To confirm a Paging Message (Personal Message):
Display Indication Operation and Information
##SUN# 25# 12:00PM
PLY.PAGE# MESSAGE
(KTS)
1. Lift handset or press SPK. (See Note 1)
2. Dial 953. (Playing start.) (see Note 2, 3)
3. Hear a message from handset or built-in speaker.
(see Note 4)
##SUN# 25# 12:00PM
10##############
4. Hang up or press SPK.
To Next Page