¾ 7-3-3-25 ¾
Other Features
To record and send a General Message: (Cont'd)
Display Indication Operation and Information
(SLT)
1. Lift handset.
2. Dial 7 and 940. (Dial Plan 1) (see Note 2)
or
2. Dial 050 (950). (Dial Plan 2) (see Note 2)
3. Dial desired extension number (10 - 79/100 - 799) or
desired Hunt Group number (00 -04).
4. Dial
*
. (Recording start.)
5. Record a message from handset.
6. Dial
*
. (Recording finish and Dial Tone may be sent.)
(see Note 3)
7. Hang up.
* When user hangs up without dialing
*
or #, the recorded
message will be saved. When 16 sec. Has passed during
message recording, timer counting will automatically be
finished and the recorded message will be saved.
Note 1: When Program #75-D is 0 (No tone), press ICM key
to seize Intercom after lifting handset.
Note 2: When VAU unit is not inserted in the system, Voice
Paths are occupied or Memory area for the Personal
Message is full condition, Busy Tone will be sent.
Note 3: If user dials “#” instead of "
*
", recording contents will
be canceled and Dial Tone may be sent.
To confirm General Message(s)
at originating extension
:
(This feature is available only
KTS with Display
.)
Display Indication Operation and Information
GENERAL# MESSAGE
MW# TO##12#######
(KTS with Display)
1. Press CHECK and dial #.
(For Example: desired extension No. 12)
* If desired extension has Name, system will indicate the
name for extension number.
* User can select the message to be confirmed by dialing
*
or #.
(
*
: Scroll forward, #: Scroll backward)
##SUN# 25# 12:00PM
PLY.GNRL.MESSAGE
2. Press ICM. (Playback message.)
* When Voice Paths are occupied, Busy Tone will be sent.
* After this operation, user can confirm a General Message
from handset.
* When recorded contents has been finished, 1-beep tone
(400 Hz, 0.5 sec.) will be sent.
To Next Page
Loading...