Nitsuko 1232 - Page 378

¾ 7-3-3-26 ¾
Other Features
To erase recorded General Message(s) individually
at originating extension
:
(This operation is available
only KTS
.)
Display Indication Operation and Information
GENERAL# MESSAGE
MW# TO##12#######
(KTS with Display)
1. Press CHECK and dial #.
(For Example: desired extension No. 12)
* If desired extension has Name, system will indicate the
name for extension number.
* User can select the message to be erased by dialing
*
or
#. (
*
: Scroll forward, #: Scroll backward)
##SUN# 25# 12:00PM
2. Press HOLD.
(KTS)
1. Lift handset or press SPK.
2. Press ICM key. (See Note)
3. Dial
*
.
4. Dial desired extension number or Hunt Group number.
5. Dial
*
.
6. Hang up or press SPK.
Note : When Program #75-D is 0 (No tone), skip Step 2.
To erase all recorded General Messages
at originating extension
:
Display Indication Operation and Information
(KTS)
1. Lift handset or press SPK.
2. Press ICM key. (See Note 1)
3. Dial
*
and 0 and
*
. (see Note 2)
4. Hang up or press SPK.
(SLT)
1. Lift handset.
2. Dial 69. (Dial Plan 1) (see Note 2, 3)
or
2. Dial 059 (959). (Dial Plan 2) (see Note 2, 3)
3. Hang up.
Note 1: When Program #75-D is 0 (No tone), skip Step 2.
Note 2: This operation is a same canceling operation as
Message Waiting, Intercom Callback, Call Forward,
Remind Call on SLT, and Do Not Disturb (DND)
features. When this operation has been done, all the
features which had been set will be canceled, and
MW lamp/Indicator will be go off.
Note 3: When messages are erased, Dial Tone may be sent.