12
Utility mode
12-36 CS193/CS173/CS163
Function Management Settings
!
Detail
The following functions cannot be used if "Network Function Usage Settings" is set to "OFF".
PC-FAX transmission
Using the HDD TWAIN driver to view and retrieve documents in user boxes
Using Box Operator to view and retrieve documents in user boxes
Using Scan Direct to retrieve documents in user boxes
Using Job Spooler to view and retrieve documents in user boxes
Box operations using the Web Connection (The User Box tab does not appear.)
Stamp Settings
Driver Password Encryption Setting
HDD Encryption Setting This setting appears when the optional Security kit is installed.
Specify an encryption passphrase to encrypt data in the hard disk.
For details, refer to the User manual – Box Operations. When a setting is specified, all
data written to the hard disk is encrypted to protect it. If the encryption key is changed,
the hard disk will be reformatted.
Parameter Description Default Setting
Parameter Description Default Setting
Network Function Usage
Settings
Specify settings for network functions that are difficult to
count when managing operations.
ON
Parameter Description
Apply Stamps Select whether or not a stamp is added when printing or sending.
Delete Registered Stamp Select whether or not stamps registered for copy protection can be deleted.
Description Default Setting
The encryption password
for the printer driver can be
changed. For details, refer
to the User manual – Print
Operations.
Use Factory Default
To Next Page
Loading...
