if the setting frequency of next stage is higher than that of the current stage, it
will accelerate to the next stage with the acceleration time of next stage.
Code Name Setting range Default Min. Attri.
E0.07 Digital setting frequency 0.00...[E0.09] Hz 50.00 0.01 Run
E3.40 Multi-speed frequency 1 0.00...[E0.09] Hz 0.00 0.01 Run
E3.41 Multi-speed frequency 2 0.00...[E0.09] Hz 0.00 0.01 Run
E3.42 Multi-speed frequency 3 0.00...[E0.09] Hz 0.00 0.01 Run
E3.43 Multi-speed frequency 4 0.00...[E0.09] Hz 0.00 0.01 Run
E3.44 Multi-speed frequency 5 0.00...[E0.09] Hz 0.00 0.01 Run
E3.45 Multi-speed frequency 6 0.00...[E0.09] Hz 0.00 0.01 Run
E3.46 Multi-speed frequency 7 0.00...[E0.09] Hz 0.00 0.01 Run
E3.47 Multi-speed frequency 8 0.00...[E0.09] Hz 0.00 0.01 Run
E3.48 Multi-speed frequency 9 0.00...[E0.09] Hz 0.00 0.01 Run
E3.49 Multi-speed frequency 10 0.00...[E0.09] Hz 0.00 0.01 Run
E3.50 Multi-speed frequency 11 0.00...[E0.09] Hz 0.00 0.01 Run
E3.51 Multi-speed frequency 12 0.00...[E0.09] Hz 0.00 0.01 Run
E3.52 Multi-speed frequency 13 0.00...[E0.09] Hz 0.00 0.01 Run
E3.53 Multi-speed frequency 14 0.00...[E0.09] Hz 0.00 0.01 Run
E3.54 Multi-speed frequency 15 0.00...[E0.09] Hz 0.00 0.01 Run
Step 4: Set the acceleration time / deceleration time, rotation direction for each
stage
EFC x610 Series
Bosch Rexroth AG
Functions and Parameters
DOK-RCON03-EFC-X610***-IT05-EN-P
137/389
To Next Page
Loading...
Need help?
General
