Ricoh MT-C1 - Page 306

15 February 2006 FUSING UNIT
3-77
Replacement
Adjustment
[A]: Entrance guide plate ( x 2)
[B]: Pressure roller ( x 2)
NOTE: The pressure roller and pressure roller bearing should always be
replaced together.
[C]: Lubricate the inner and outer surfaces of the bushings with Barrierta S552R
grease.
NOTE: If the bushings are warm, allow them to cool before applying the
Barrierta grease. Applying the grease while the bushings are hot could
generate gas.
B246R1010.WMF
B246R1011.WMF
[A]
[B]
[C]