Ricoh MT-C1 User Manual

15 February 2006 OVERVIEW
4-5
Trouble-
shooting
Display Details Recovery
Download result failure 3 42
Download Error E42
Module ID
Card No. xx/xx
Operation panel or language download
failed. For this error, sometimes the
message may not be displayed.
• Cycle the machine
off/on and re-try
Download result failure 4 43
Download Error E43
Module ID
Card No. xx/xx
Print download failed.
• Cycle the machine
off/on and re-try
Download result failure 5 44 Download Error E44
Module ID Card No.
The data targeted for the write
operation could not be accessed.
• Turn the machine
power off/on.
• Set controller DIPSW-
1 to ON to force the
machine to write
• If you cannot force
the machine to write,
replace the controller
board.
Download invalid 50 No Valid Data E50
The source data for the update could
not be authenticated.
• Use the correct SD
card.
Remote ROM update failure 1 51 (no display)
The source data for the ROM update is
corrupted because the machine is
operating and an SC code has been
issued.
• Turn the machine
power off/on and try
again.
Remote ROM update failure 2 52 (no display)
The source data received for the ROM
update is corrupted; it failed a SUM
check due to its abnormal length.
• Try again with the
correct data.
Download result failure 6 53 (no display)
The previous download in progress
was cancelled.
• Do the download
procedure again.

Ricoh MT-C1 Specifications

General

Brand	Ricoh
Model	MT-C1
Category	All in One Printer
Language	English