15 February 2006 A3/DLT FEEDER KIT (B475)
1-25
Installation
4. Remove the right tandem tray [A] (" x
2). Save these screws.
5. Connect the short connector [B] to the
left tandem tray terminal [C].
6. Remove the stay [D] (" x 2) and re-
install it.
7. Attach the A3/DLT tray [E], using the
screws removed earlier.
8. Re-install the front cover.
9. Switch the machine on, enter the SP
mode and select the paper size for
Tray 1 with SP5959-001 (Paper Size –
Tray 1) For details, see SP5959 in
section “5. Service Tables”.
10. Attach the appropriate decal for the
selected paper size.
B475I709.WMF
B475I201.WMF
B475I202.WMF
[A]
[B]
[C]
[D]
[E]
To Next Page
Loading...
