15 February 2006 SERVICE PROGRAM MODE TABLES
5-85
Service
Tables
Firm Up User Check 085
This SP setting determines if the operator can confirm the previous version of
the firmware before the firmware update execution. If the option to confirm the
previous version is selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the URL.
Firmware Size 086
Allows the service technician to confirm the size of the firmware data files during
the firmware update execution.
CERT: Macro Version 087
Displays the macro version of the NRS certification
CERT: PAC Version 088
Displays the PAC version of the NRS certification.
CERT: ID2 Code 089
Displays ID2 for the NRS certification. Spaces are displayed as underscores
(_). Asteriskes () indicate that no NRS certification exists.
CERT: Subject 090
Displays the common name of the NRS certification subject. CN = the following
17 bytes. Spaces are displayed as underscores (_). Asterisks () indicate that no
DESS exists.
CERT: Serial Number 091
Displays serial number for the NRS certification. Asterisks () indicate that no
DESS exists.
CERT: Issuer 092
Displays the common name of the issuer of the NRS certification. CN = the
following 30 bytes. Asteriskes () indicate that no DESS exists.
CERT: Valid Start 093
Displays the start time of the period for which the current NRS certification is
enabled.
CERT: Valid End 094
Displays the end time of the period for which the current NRS certification is
enabled.
Manual Polling 200
No information is available at this time.
150 Selection Country
Select from the list the name of the country where Cumin-M is installed in the
machine. After selecting the country, you must also set the following SP codes
for Cumin-M:
• SP5816-153
• SP5816-154
• SP5816-161
0: Japan 6: Italy
1: USA 7: Netherlands
2: Canada 8: Belgium
3: UK 9: Luxembourg
4: Germany 10: Spain
5: France
To Next Page
Loading...
