SERVICE PROGRAM MODE TABLES 15 February 2006
5-116
5921 Key Card Setting Japan Only (B064)
Enables operation with a key card device.
[0~1/1]
0: No key card operation
1: Key card operation
5952 Fact Adjust Mode DFU
5959* Paper Size (B064)
001 Tray 1
Tray 1 (Tandem Tray) can accept two paper sizes: A4 LEF and LT LEF. Enter
the correct number to select the size of the paper loaded in Tray 1:
A4 LEF: 5
LT LEF: 38
If the A3/DLT Tray Kit B475 is installed, enter the correct number to select the
size of the paper loaded in the kit:
Size No. Size No.
A3 SEF 132 11" x 17" 160
B4 SEF 141 81/2" x 14" SEF 167
A4 LEF 5 81/2" x 11" LEF 38
005 Tray 4 (LCT)
Tray 4 (LCT) accepts three paper sizes. Enter the correct number of the size of
the paper loaded in the LCT:
A4 LEF: 5
B5 LEF: 14
LT LEF: 38
If the LG/B4 Feeder Kit B474 is installed, enter the correct number to select the
size of the paper loaded in the kit:
A4 SEF: 133
B4 SEF: 141
LG SEF: 164
006 Cover Sheet
The Cover Interposer Tray B470 is provided with two arrays of paper size
sensors to detect the paper size. However, some of the paper sizes may not be
indicated correctly on the display panel. For more details, refer to the Cover
Interposer Tray manual section “Paper Size Detection”.
To Next Page
Loading...
Need help?
General
