15 February 2006 SERVICE PROGRAM MODE TABLES
5-123
Service
Tables
6107 Cover Feeder Size Change (B246)
This SP sets the priority paper size setting for the cover interposer tray (B704).
001 Priority (All) 0: A3
1: 12"x18"
002 EU/CH 0: 8½" x 13"
1: 8½" x 13"
2: 8¼" x 13"
003 NA 0: 8½" x 14"
1: 8½" x 13"
004 NA 0: LT LEF
1: 10½" x 7¼"
005 NA 0: LT SEF
1: 8" x 10"
006 EU/CH 0: Taiwan 8-Kai
1: DLT
007 EU/CH 0: Taiwan 16-Kai
1: LT SEF
008 EU/CH 0: Taiwan 16-Kai
1: LT LEF
6109 Staple Position Adjustment
Use this SP to shift the position of the stapling done by the corner stapler of the
finisher. This SP shifts the staple position forward and back across the direction of
paper feed.
• Use the “•” key to toggle between + and –.
• A larger value shifts the stapling position to shift forward.
• A smaller value shifts the stapling position backward.
The settings are done for each paper size.
[-2 to +2 / 0 / 0.5 mm]
To Next Page
Loading...
